Hardware
&
FURNITURE
Mattresses............................. 142
Table Legs ............................. 143
Hinges ................................ 147
Cupboard Catches. . . . . . . . . . . . . . . . . . . . . . 148
Handles ............................... 150
Cupboard Stays ........................ 150
Gas Struts ............................. 151
Storage ............................... 151
One Key System........................ 152
Internal Fixings ........................ 153
External Fixings ........................ 154
Curtains ............................... 156
Room Dividers ......................... 157
Roof .................................. 158
Mattresses
MATTRESS INNERSPRING
042832 CUT CORNER 1830 X 1370 X 210
042833 STANDARD 1880 X 1220 X 210
042834 CUT CORNER 1880 X 1220 X 210
042835 SINGLE 1830 X 760 X 210
042836 CUT CORNER WITH BOLSTER 1830 (+100) X 1370 X 210
042837 CUT CORNER WITH BOLSTER 1830 (+100) X 1500 X 210
There is nothing like a good night’s sleep, especially aer a hard day’s travel.
The latest range of Camec mattresses are designed with comfort and support
in mind. Made from high quality, durable non-woven Damask fabric, they
feature Bonnell hard coil springs, a 2cm high density foam top layer, 400g
white cotton felt and come in a range of sizes that will suit nearly all caravans
and pop tops. Features a 5 year warranty.
Bolster Explanation: During the day the extra 100mm bolster can be placed on
top of the mattress at the head end to provide more space in the RV. At night it
can be dropped down to increase the mattress length.
142 camec.com.au
TABLE LEGS
TABLE HINGE SECTION
034298 4M CLEAR ANODISED MALE
034299 4M CLEAR ANODISED FEMALE
035210 MALE & FEMALE SECTION - 495MM LONG
Male section mounts onto table and the female
section attaches to the wall.
TABLE SLIDE RAIL KIT
007960
Suits bi-fold and folding table legs.
Kit includes: 2 x plugs, 2 x brackets
1 x 500mm Rail
1 x 950mm Rail
FEATURES
• Attaches to a table top to a wall
• 2 x supplied brackets clip to the aluminium rail to
secure table
• 2 x length rails included to allow table to be
attached in two seperate locations
• Table requires some form of leg support at other
end
PLASTIC BRACKET - TABLE SLIDE
007961
Replacement bracket for table slide kit (refer code
007960).
PLASTIC HINGE - TABLE SUPPORT LEG
007908
Replacement plastic hinge for table support legs
(refer codes 007873, 007874 and 007875). Suitable for
folding the table leg.
ALI TABLE HINGE 995MM
007958 MALE
007959 FEMALE
FEATURES
• This clip system releases by liing the far end
of the table up - the sections then are easy to
separate
• The table requires some form of leg or support at
the end away from the clip section.
BREHA TABLE SUPPORT LEG
007873 305MM
007874 355MM
007875 457MM
Hinged support leg for table tops when converting to
bed base.
143
making anywhere home
hardware
TABLE LEG - WINEGLASS BENT
TUBE
035213
5pcs-Grey Base Silver Zinc Leg.
FEATURES
• Centre bent tube section removes to
fold table down, and allows the table
to rotate in an oset method to give
greater clearance
• The top is removable with a finger
knob and does not include a table
top
SPECIFICATIONS
• Table Leg Height: 700mm
• Base: 430mm (diameter)
• Top Plate: 300mm x 170mm
• Pipe: 38mm outside diameter
• Pipe Oset: 200mm
• Grey
WINEGLASS TABLE LEG - PLATE
TOP
007885
Wineglass Table leg in grey. Four pieces
make up this table. It has a removable
base which can be bolted or unbolted
from floor with a finger bolt inside
base.
FEATURES
• Centre tube section removes to fold
table down.
• The top is removable with a finger
knob.
• This does NOT include a table top,
these must be individually made by
the customer.
• 38mm tube
BREHA ISLAND TUBE TABLE
LEG SET
007876
SPECIFICATIONS
• Bottom plate is recessed into the
floor to stop any tripping hazard
when the table is removed
• 45mm tube
BREHA CHROME TUBE FOR
PEDESTAL TABLE LEG
007924
SPECIFICATIONS
• Dimensions: 690mm(h) x 44.5mm(d)
WINEGLASS TABLE LEG WITH
ANGLE IRON TOP
007884
A wineglass shaped leg with an angle
iron split top.
SPECIFICATIONS
• Table Leg Height: 730mm
• Base: 420mm(diam)
• 38mm tube
WINEGLASS TABLE LEG
044956
This Wineglass Table Leg complete
with base and top comes in four
parts (top plate, tube, bottom plate
& anchor), making it easier to pack
up and store while on the go in your
caravan or camping.
SPECIFICATIONS
• Silver leg black top
• Wineglass table leg complete with
base & top
• Includes: 1x top plate, 1 x leg tube, 1
x bottom plate, 1 x anchor
• Height: 700mm including base
• Finish: Powder Coated
• Weight: 5kg
• 45mm tube
BREHA CLIP - ISLAND LEG POLE
007912
For storage of island table leg poles
when table is not in use.
Suits 45mm tube.
table legs
144 camec.com.au
TOP PLATE - TUBULAR ISLAND
LEG
007909
Replacement top plate for Island tube
table set (refer code 007876).
Suits 45mm diameter tube.
BI-FOLD TABLE LEG - 675MM
007905
This unique table top hinge leg oers
versatility and portability. It can also
serve as a bed base.
FEATURES
• Unique European style aluminium
leg
• Adjusts to both table and bed height
• Table top can be lied from the wall
bracket and positioned elsewhere on
the caravan, even outside
SPECIFICATIONS
• Height: 675mm
• Bi-Fold Height: 315mm
FOLDING TABLE LEG - 675MM
007906
This unique table top hinge leg oers
versatility and portability. The table top
can be lied from the wall bracket and
conveniently positioned elsewhere on
the caravan, even outdoors.
SPECIFICATIONS
• Hinged at the top to allow folding
• Ideal for stowing table top when
space is a premium
• Can be used with table hinge section
(P3) or table kit (007960 - P3)
TOP PLATE SWING AWAY
TABLE LEG
007895
Suits 38mm diameter tube.
TABLE LEG COLLAR SWING
AWAY
007897
Replacement swing away collar for
table leg (refer code 007892).
TOP PLATE FOR PEDESTAL
TABLE LEG SPLIT
007921
Replacement top plate for pedestal
table leg split. Suits 45mm tube.
SWING AWAY TABLE LEG 4
PIECE
007892
Swings away where space is very
restricted. Designed to swing table
out of the way when not being used to
provide more space in van.
FEATURES
• Includes leg, top plate and bottom
plug to secure to floor
• Collar attaches to the side of seat to
give added support to leg
• 2 legs required for longer tables
SPECIFICATIONS
• Underside of Table to Floor: 750mm
• Oset: 210mm
• Tube Dimension: 38mm
• Weight: 2.79kg
TABLE LEG - V TYPE 710 MM
007904
These simple “V” shaped, chromed
wire legs which lock for vertical
support, can pivot horizontally under
the table top for ease of storage or
when the table top is being used as
a bed.
SPECIFICATIONS
• Dimensions: 80mm(w) x 710mm(h) x
20mm(d)
EAZY-LIFT TABLE LEG AND
ADJUSTABLE PLATE
007890
This telescopic table leg has an
adjustable height floor plate to allow
for correct height setting when table is
being used as a bed base. Lock knob
tightens a friction shim to prevent
accidental movement.
SPECIFICATIONS
• Overall Height: 855mm
• Closed Height: 480mm
table legstable legs
145
making anywhere home
hardware
LOCKING KNOB - EASY LIFT LEG
007940
Replacement locking knob with a 3/8”
Whitworth thread to suit Eazy li table
leg (refer code 007890).
SPECIFICATIONS
• 3/8” Whitworth thread Black
PRIMERO COMFORT TABLE SUPPORT
044429
The elegant Primero Comfort Table Support oers the complete range of functionality
and usability for modern caravan and motor homes. Designed and tested to oer
maximal stability, longevity and flexibility while considering space and weight. This
table support can be moved down smoothly by pulling the handle to convert into an
additional sleeping area. While the gas spring helps to raise the table back into its dining
position considering space and weight.
FEATURES
• Light Weight
• Reduced height compared to previous model (8mm)
• New ergonomic designed handle
• Small footplate to save space
• No screw cover plate required
• Swivel function
SPECIFICATIONS
• Height: 300-600mm
• Swing: 360mm
• Weight: 7.7kg
KNOB - SWING AWAY TABLE LEG
007899
For wall mounted use. Bottom plug
secures to the floor for the tube to
swivel, the collar is attached to the
side of the seat or wall to give added
support to the leg.
WING NUT HANDLE
007923
Wing nut handle for pedestal table leg.
FIAMMA TUBE PRO TABLE LEG
007913 RECESS BASE PLATE
007914 DOME TOP PLATE
040199 FOLDING TRIPOD BASE
040271 TUBE PRO TABLE LEG
Chrome tube for the Tube Pro 70 table leg. Made from anodised aluminium.
SPECIFICATIONS
• The Tube Pro table leg comprises of 3 parts - tube (code 040271), flush top (code 007914), recessed
base (code 007913) and optional tripod used to convert table for outdoor use (code 040199). Each
item is sold individually
• Can easily be dismantled and stored
• Height: 700mm - height adjustable
PEDESTAL TABLE LEG - ANGLE IRON TOP
007880
The 4 way chrome base is bolted to the floor with the supplied eye bolt. The table can be easily removed to use outside or
as a bed base. The chrome tube and angle iron top can be removed by undoing the wing nuts top and bottom. Two long & 2
short legs on base.
FEATURES
• Can be anchored to the floor for travel but can also be moved for use elsewhere
• Freestanding
• Sturdy table legs with an angle iron top plate for extra support
• Includes 2 long and 2 short legs on base
SPECIFICATIONS
• Table Leg Height: 690mm
• Long Base: 615mm x 830mm
table legs
146 camec.com.au
table legs
Hinges
FOLDING BRACKET 305MM WHITE
008006
305mm spring loaded. Can be used for folding bench
tops or foot stool supports.
SPECIFICATIONS
• White
• Locks into place when raised
• Easy release
BUTT HINGE NYLON 51MM
008019
FEATURES
• Nylon
• Heavy duty
• Durable
SPECIFICATIONS
• 51mm
CUPBOARD HINGE
008027 FLAT BRASS
Popular semi concealed flat leaf cupboard hinge in a
choice of two finishes.
CUPBOARD HINGE FLAT
008033
A semi concealed oset leaf cupboard hinge. Fits
flush on the outside of the frame and flush on the
inside of the door.
SPECIFICATIONS
• Zinc finish
• Hole centres on long side: 52mm
• Hole centres on short side: 26mm
BUTTERFLY HINGE
008034 NICKEL
008036 BRASS
MINI DOOR OFFSET HINGE NO18
015651
Semi concealed lightweight, non-rusting, aluminium
hinge for mini access doors.
SPECIFICATIONS
• Chrome
147
making anywhere home
hardware
CUPBOARD CATCHes
ROLLER CATCH-CUPBOARD
008059
Blister Pack of 2.
A positive action roller catch.
SCREW GRIPPER CATCH
008060
FEMALE SECTION-C/CATCH WHITE
008063
Nylon.
CUPBOARD VERTICAL CATCH NYLON
008061
Gripper catch, vertical. Used to keep cupboard doors
or draws closed. This version is usually placed on a
vertical side.
FEATURES
• Strong and positive nylon gripper catch for
cupboard doors and drawers
• Vertical striker
• Base Width: 13mm x 32mm
• 2 Pieces
CUPBOARD HORIZONTAL CATCH NYLON
008062
Gripper catch, horizontal. Two pieces that make up
the horizontal gripper catch. Used to keep cupboard
doors or draws closed.
FEATURES
• Strong and positive nylon gripper catch for
cupboard doors and drawers
• Horizontal striker
• Base Width: 13mm x 32mm
• 2 Pieces
CUPBOARD CATCH
008078
A strong plastic spring-loaded catch used in many
early Franklin caravans (2 part).
SPECIFICATIONS
• Ideal for doors that are 10mm thick
• Measures 73mm from rear single screw hole to
each front screw hole
• Brown
CUPBOARD CATCH
008081
A strong plastic spring-loaded catch used in many
early model caravans (2 part).
• Brown
CAMEC NICKEL CATCH SET
008089 13MM
008091 19MM
Camec nickel catch set includes catch, rosette, knob
and striker plate. Knob sits near flush with drawer
when locked and pops out when pressed to open.
CUPBOARD CATCH LONG STEM
008080
The 1269B long stem cupboard catch is a pull catch
that suits a cupboard door with a 20mm thickness. It
accepts various knobs and includes striker plate.
MINI CUPBOARD CATCH STRIKER
008095
COMPRESSION LATCH
051723
COROMAL BOOT LOCK
051648
148 camec.com.au
CAMEC CUPBOARD CATCHES
LOCKWOOD 200 STREAMLATCH
008235
Main door lock ideal for narrow door stiles.
• Chrome
COMPRESS LATCH FLUSH FITTING
008238 SMALL
017166 LARGE
For use on Service Doors.
• Chrome
ROSETTES
BACK CATCH
PUSH BUTTON KNOB
ANGLE STRIKERS - OPTIONAL
PART NO. DESCRIPTION
008141
MINI NICKEL PLATED
008150
16MM NICKEL PLATED S/16MM THICK DOOR
008156
19MM NICKEL PLATED S/19MM THICK DOOR
008157
19MM WHITE S/19MM THICK DOOR
PART NO. DESCRIPTION
008097
LARGE WHITE
008143
MINI BROWN
008144
MINI NICKEL PLATED
008145
MINI WHITE
PART NO. DESCRIPTION
008133
16-19MM NICKEL PLATED
008134
16-19MM WHITE
008137
MINI NICKEL PLATED
PART NO. DESCRIPTION
008103
PUSH BUTTON CATCH STRIKER CATCH
cupboard catches
149
making anywhere home
hardware
HANDLES
CUPBOARD STAYS
EMRO HANDLE - 150MM
036752
A strong chrome plated handle suitable as a pull
handle on the corner of caravan.
SPECIFICATIONS
• Length: 130mm
• Chrome
• 4 hole mounting
FIRMOTOP STAY CUPBOARD STAY UP
008009
FEATURES
• Chrome finish cupboard stay up
• Spring pressure supports the flap when raised and
holds it firmly against the cabinet when closed
SPECIFICATIONS
• Opens to 130mm overall
• Chrome
CHROME GRAB HANDLE
007977 100MM
007979 152MM
802 WINDOW STAY
008014 SMALL
This folding stay is available in two sizes and was
oen used as a window stay in older caravans.
SPECIFICATIONS
• Small measures 75mm from central pivot to
outer pivot
• Large measures 100mm from central pivot to
outer pivot
VECAM GRAB HANDLE
007980 GREY
007983 WHITE
A strong plastic grab handle suitable as a pull
handle on the corner of caravans or camper
trailers. Gasket not included. Please use silicone
under the handle and also on the threads of
your screws.
SPECIFICATIONS
• Overall Length:160mm
• 23mm between hole centres horizontally
• 136mm between hole centres vertically
VECAM GRAB HANDLE GASKET
007981 GREY
007984 WHITE
Replacement gasket for grab handle (refer code
007980 and 007983).
GRAB HANDLE PLASTIC
007988
A strong plastic grab handle suitable as a pull
handle on the corner of caravans or camper
trailers.
SPECIFICATIONS
• White
• Overall Length: 175mm
• 16mm between hole centres horizontally
• 153mm between hole centres vertically
150 camec.com.au
GAS STRUTS
STORAGE
GAS STRUTS
These are used to assist the liing of the roof
of many pop-tops. Please note: Ensure the
extended length is suitable and that the ends
are similar. Confirm Newton rating on your existing
gas strut.
ROLLOUT PANTRY AND BASKETS
000122 2 X 110MM BASKETS AND FRAME
000125 2 X 200MM BASKETS AND FRAME
The pantry comes with 2 chrome plated wire
baskets that clip onto the frame. Can be made to
dierent widths to suit the door opening. The main
frame is tube steel which slides into the cupboard
on reversible runners. Additional baskets are also
available.
FEATURES
• Keeps goods secure while travelling
• Includes chrome plated baskets
SPECIFICATIONS
• Frame Dimension: 470mm(d) x 570mm(h)
• Min space required 480(d) x 600 (h)
ROLLOUT PANTRY BASKET
000124 110MM
Replacement or spare pantry basket to suit rollout
pantry (refer code 000122 Rollout Pantry). This is a
chrome plated wire basket that clips onto the rollout
pantry frame.
SPECIFICATIONS
• Dimensions: 460mm(l) x 110mm(w) x
110mm(h)
ROLLOUT PANTRY BASKET
000127 200MM
Replacement or spare pantry basket to suit rollout
pantry (refer code 000125 - Rollout Pantry and
200mm Baskets). This is a chrome plated wire basket
that clips onto the roll out pantry frame.
SPECIFICATIONS
• Dimension: 460mm(l) x 200mm(w) x
110mm(h)
040273 125N - 195.5MM - 12.25KG CAPACITY
015645 150N - 317MM - 15KG CAPACITY
035305 150N - 450MM - 15KG CAPACITY
008406 100N - 525MM - 10KG CAPACITY
008407 150N - 525MM - 15KG CAPACITY
008408 200N - 525MM - 20KG CAPACITY
008424 230N - 525MM - 23KG CAPACITY
008397 240N - 825MM - 24KG CAPACITY
035302 250N - 430MM - 25KG CAPACITY
008409 250N - 525MM - 25KG CAPACITY
008398 290N - 825MM - 29KG CAPACITY
008410 300N - 525MM - 30KG CAPACITY
008425 330N - 525MM - 33KG CAPACITY
008395 330N - 825MM - 33KG CAPACITY
008411 350N - 525MM - 35KG CAPACITY
008412 400N - 525MM - 40KG CAPACITY
008396 435N - 525MM - 43.5KG CAPACITY
008413 500N - 525MM - 50KG CAPACITY
035297 600N - 525MM - 60KG CAPACITY
NB: M8 nuts are not supplied with gas struts
151
making anywhere home
hardware
ONE KEY SYSTEM
ONE KEY BARREL KIT
042087 - BARREL 2*
042088 - BARREL 4*
042089 - BARREL 6*
042090 - BARREL 8*
043071 - BARREL 12*
041815 - BARREL 20*
*NB: One barrel in each kit is a longer one to fit the
deeper boot lock 042092, 044947, 044946
ONE KEY FITS ALL T HANDLE WINDSOR
RAPID DOOR NO BARREL
042092 REPLACEMENT HANDLE - CHROME
042508 BARREL ONLY, GENERIC KEY
042509 BARREL ONLY, KEYED TO MATCH ALL OTHER KEYS
(SPECIAL ORDER)
044947 BLACK
044946 SATIN
PADLOCK KIT
041567 PADLOCK WITH 2 BARRELS
This chrome plated padlock is fitted with Camec’s
One Key Fits All barrel. Each padlock can be keyed
alike to the same key as the other locks on the
caravan/RV. See your Camec RV retailer if you require
additional keyed alike barrels for your application.
Padlock shackle diameter is 6.3mm.
One key fits all system. Used to replace a multitude of dierent keys, with one. Fits Camec locks only, or Thetford access doors (requires adaptor 043073 or 040185).
Additional barrels with specific key numbers can be special ordered.
ONE KEY LARGE T HANDLE
044947 BLACK
044946 SATIN
Fits all rapid glider boot doors
ONE KEY FITS ALL T HANDLE SMALL BOOT
DOOR NO BARREL
042091 REPLACEMENT HANDLE
042506 BARREL ONLY GENERIC KEY
042507 BARREL ONLY KEYED TO MATCH ALL OTHER KEYS
(SPECIAL ORDER)
The replacement handle features a housing capable
of accommodating the One Key Fits All barrel.
ONE KEY DOOR LOCK
042093
Replacement outer housing for all Camec
3-point locking doors. This housing will enable
it to accommodate the One Key Fits All barrel.
Replacement housing only required for doors without
a Camec logo on the handle.
ONE KEY RED ASSEMBLY KEY
041577 SUITS LOCKS BEFORE 2015
051826 SUITS LOCKS AFTER 2015
ONE KEY FITS ALL CAMEC TONGUE LOCK
HOUSINGS
040186 CAMEC SQ ACCESS
040187 ALL STORAGE
Suits one key fits all system
ONE KEY ZADI ADAPTOR
043073 BLACK
040185 ALL BARREL ADAPTOR - WHITE
One key fits all adaptor to suit the Thetford access/
toilet door
FEATURES
• Two adaptors per packet
• Some installation required.
ONE KEY FITS ALL CAMEC 2RC MINI
040268
Supplied with additional shorter cam for a van water
filler application.
152 camec.com.au
INTERNAL FIXINGS
TOWEL RAIL 3.6M
008203 CHROME PLATED 19MM X 3.6M
039112 STAINLESS STEEL 16MM X 3.6M
039113 STAINLESS STEEL 19MM X 3.6M
Commonly used as a drying rail at front or rear of RV.
3/4” RAIL OVAL SHAPE
008198
To suit 19mm towel rails. Chrome plated steel.
SPECIFICATIONS
• 3/4” - 19MM Rail
NON SKID GRIP TAPE
000167
FEATURES
• Anti slip grit surface improves footing on step
ladders and trailer frames
• Dimensions: 50mm(w) x 18m(l) roll
TRAY RAIL NICKLE PLATED
008215
SPECIFICATIONS
• 1.8m
• 4mm diameter
TOWEL RAIL PILLAR END AND CENTRES
008196 PILLAR CENTRE 3/4” 19MM RAIL CHROME
008197 PILLAR END 3/4” - 19MM RAIL CHROME
008201 PILLAR END 5/8” - 16MM RAIL CHROME
008200 PILLAR CENTRE 5/8” - 16MM RAIL CHROME
CHROMED BRASS THROUGH PILLAR
008219 PILLAR THROUGH
008223 PILLAR END NICKEL
008222 PILLAR CORNER
Chromed Brass Pillar 4mm. These are used as shelf
surrounds, with 4mm rod. The corner pillar has 2
holes at 90 degrees to each other, the end pillar hole
goes only half way thru and the through pillar has a
hole going all the way through.
FEATURES
• NO threaded bolts are included with these.
5/8” FLANGE OVAL SHAPE
008202
SPECIFICATIONS
• To suit 16MM Rail
CAMLOCK - LONG TONGUE
008231
SPECIFICATIONS
• 22mm Bolt Lock tongue
• Keyed alike
153
making anywhere home
hardware
EXTERNAL FIXINGS
TAILGATE LATCH-SPRING LOADED
035326
A common fixture to hold tailgates up on trays.
FIAMMA SECURITY DOOR HANDLE
000746 HAND 31CM
000747 HAND 46CM
Fiamma Helping Hand Door Handle is made of solid
aluminium. It serves as a convenient handle to make
entering and exiting the vehicle easier. When closed
back onto the door, it works as an anti-the device.
CAMLOCK-SHORT THREAD SHORT TONGUE
008240 SHORT THREAD KEYED ALIKE
035550 SHORT THREAD RANDOM KEY
KNOBLOCK W-METAL PLATE WHITE
035438
Pushout window Knob Lock With Metal Plate, White
knob. Suit older style, pushout windows. These
pop-rivet onto window. Plastic is held to metal with
a rivet.
FIAMMA SECURITY 46 PRO HANDLE
034093
Security handles take up little space when folded
against wall. They serve as a useful handle to make
entering and exiting the vehicle easier. They adapt to
all doors, opening both to the right and le. Includes
installation brackets, screws and internal counter
brackets.
CAMLOCK - SHORT THREAD LONG TONGUE
008239
SPECIFICATIONS
• Keyed alike
SWINGING BOLT - 2 PIECE
007997
Used on old style protector shades
SPECIFICATIONS
• 38mm and plate
CAMLOCK - LONG THREAD
008243 LONG THREAD RANDOM KEY
008242 LONG THREAD KEY/ALIKE
Access door lock or Coin Machine Lock, long thread.
Fits a 19mm hole with an overlap of 2mm.
MILLARD POW PLASTIC/METAL LOCK
008553
Push out window swivel lock with plastic lever with
metal base. Colour: Black.
VISCOUNT POW GREY KNOB LOCK
008556
Nylon push out window lock.
SPECIFICATIONS
• Grey
154 camec.com.au
CABIN HOOK
008182 75MM WITH EYE
008183 100MM WITH EYE
008185 150MM WITH EYE
008186 200MM WITH EYE
008187 EYE - CABIN HOOK
SWINGING BOLT 50MM & PLATE
007998
Anti rattle Catch, stainless steel, with plate, 50mm
bolt. These are oen used to hold shut a protector
shade or old style hatch. They are stainless steel with
an alloy nut.
GARAGE LOCK CAST TONGUE
008248
SPECIFICATIONS
• Dimensions: 120mm(l) x 10mm(h) x 10mm(d)
• Commonly used on the back of the square thread
of ‘T’ Handles to allow opening from the rear
FLY SCREEN TURN BUTTON 5/16
008258
A simple locking device for hinged fly screens.
SPECIFICATIONS
• Black
CAMEC OUTER HANDLE
014382
Suits Camec 3 point lock
ROUND DOOR STOP & SCREW 75MM
008228
SPECIFICATIONS
• White
CORNER ANGLE
008158
SPECIFICATIONS
• White
SCREEN DOOR LOCK
008244
Used on camper trailer doors and shower doors
SPECIFICATIONS
• Silver
• Also know as a ‘Tulip’ lock
HOLDING CATCH ACCESS DOOR
008161
SPECIFICATIONS
• White
• Holds the access door lid open to leave your
hands free
external fixings
155
making anywhere home
hardware
curtains
METRO CURTAIN TRACK
036495
FEATURES
• White
• Runners and tape extra
SPECIFICATIONS
• 5M long
• Accepts 035440 runners
END STOP PUSH IN - MINI TRACK
007798
To suit metro track.
FEATURES
• Place one at each end of the curtain to stop them
from sliding o the track
EXPANDING PLASTIC COATED WIRE
007775
FEATURES
• White
• Use 007802 screw eye or 007803 screw hook each
end to make hanging curtains easy
• Sold per metre
METRO CURTAIN RUNNER
035440
To suit aluminium track (refer code 036495).
SPECIFICATIONS
• White
• Use approx 12 x per metre of track
• Flat base
STEEL CURTAIN GATHERING HOOK NO 7
007799
FEATURES
• Strong hook to be used to hang curtains made
with gathering tape attached
• Use with 035440 curtain runner, 036495 metro
curtain track and 007810 tape.
TRACK ALI MINI GLIDE TOP 5M CA
007779
FEATURES
• Clear anodised
• Suits curtain runners with curved base
CURTAIN ROD 16MM POWDER CTD WHITE X
5M
007771
FEATURES
• Steel conduit
• Dimensions: 5m(l) x 16mm(diam)
• White
NYLON CURTAIN GATHERING HOOK
007800
FEATURES
• White
• Lightweight gathering hook
• Use with 035440 curtain runner and 036495 metro
curtain track and 007810 tape.
SNAP IN MUSLIN BRACKET - WHITE
007786
Use screws or double sided tape to attach to wall
or ceiling.
FEATURES
• The removable cap fits onto 16mm curtain
rod, then connects into the bracket. Simple
design allows for easy removal of curtain clips
• White
SCREW
007802 SCREW EYE
007803 SCREW HOOK
• Suits 007775 Wire
GATHERING TAPE NATURAL
007810
Per Metre
FEATURES
• Sewn to top of curtain for easy attachment of
gathering hooks for use in runners/track
156 camec.com.au
REMI ROOM DIVIDER
007770
SPECIFICATIONS
• 1500w X 1900h
• High quality pleated material can be used to partition
an open space to create a cosy, intimate atmosphere
• Compact design
• Low weight
• Quiet to operate
• Grey material
JAYCO CURTAIN TAB
007807
These plastic curtain tabs slide into the curtain track
commonly found in Jayco caravans. The tabs are
sewn into the top of your curtain allowing it to slide
easily into the existing track.
FEATURES
• Sold each
JAYCO CURTAIN RUNNER
007808
FEATURES
• Common runner used in Jayco vans that utilise 2 x
white nylon runners
ROOM DIVIDER
curtains
157
making anywhere home
hardware
ROOF
703 TOGGLE CLAMP WITH PLATE
008276
Special locking catch mechanism prohibits the latch
opening accidentally.
SPECIFICATIONS
• Plate included
• Dimensions: 160mm(l) x 20mm(h) x 40mm(d)
CAMPER ROOF CLAMP LOCKABLE
008267
This clamp is commonly used on pop top caravans
and wind up campers to hold down the roof while
the trailer is in storage or while travelling.
FEATURES
• Includes toggle clamp, space for lock and extra
locking bracket suitable for a small padlock (not
included)
• Zinc plated
POP TOP INTERIOR SUPPORT
035303
Internal support for pop top camper roof.
Extendable support for pop tops when li
mechanisms or gas struts need a little extra help.
TONGUE - STANDARD ROOF CLAMP SILVER
008269
Replacement zinc plated tongue for the standard and
locking silver clamp.
SPECIFICATIONS
• Silver
CAMPER ROOF CLAMP SILVER
008265
This clamp is commonly used on pop top caravans
and wind up campers to hold down the roof while
the trailer is in storage or while travelling.
FEATURES
• Includes clamp and J clip
• Australian made
• Zinc plated
CAMPER TRAILER 3-STAGE LIFTER
008302
3-stage lier.
SPECIFICATIONS
• Outer Tube Dimensions: 710mm(l) x 32mm(w) x
32mm(d)
• Largest section measures (with wings) 750mm x
30x30mm
• Middle section extends 600mm.
• Top section extends 640mm
DROP NOSE PIN
008289
This simple locking device has many applications
such as securing the raiser arm roof clamp.
SPECIFICATIONS
• Dimensions:
- 8mm thick
- 70mm O/A length
• Suits max 45mm section
J CLIP - ROOF CLAMP SILVER
008270
Replacement J Clip for both standard and locking
silver clamps.
SPECIFICATIONS
• Silver
158 camec.com.au
STAINLESS STEEL CABLE 3/32”
008332
To suit wind up mechanisms. Per metre.
CANOPY LIFTER TUBULAR 900MM
008353
SPECIFICATIONS
• Spring Tension: Standard
• Maximum Li: 685mm
• Width: 900mm
• Max Weight: 40kg per piece
• Note: When replacing the lier it is recommended
that the opposite lier be replaced at the same
time to prevent undue stress
• Tubular cross bars
CAMPER FLEX PUSH ROD
008305
SPECIFI
CATIONS
• Length: 1677mm
• Flexible rod used for pushing camper trailer liers
up
POPTOP TENSIONER
034083 168MM ELASTIC ONLY S/008429
034084 210MM ELASTIC ONLY S/008433
008429 320MM PLASTIC ONLY
008433 390MM PLASTIC ONLY
Elasticised tensioner to keep pop-top sleeve taut
whilst elevated and tucked inside the body
when lowered.
REPLACEMENT SPRING FOR LIFTERS
008350 FLAT 700MM LIFTER
008351 FLAT 900MM LIFTER
008352 FLAT 1200MM LIFTER
008359 SPRING - TUBULAR CANOPY LIFTER
SLUGS FOR CAMPER TRAILER (4)
008307
Set of 4. these folded metal slugs fit inside the
floor tracks.
The cable lays inside the floor track adjacent to the
push rod, with a swage attached to end. The swage
prevents the cable pulling thru the slug. Tension on
the cable, pulls the slug which pushes the push rod
through the floor track, round the corner bend and
up inside the telescopic arm, thus raising the roof.
The cable goes through the largest corner slit.
CAMPER WIND-UP MECH HANDLE
008328
Suits winches with square tube drive.
roof
CANOPY LIFT NYLON ROLLER + PIN
008347 FLAT LIFTER ROLLER BLACK
008348 FLAT LIFTER ROLL RIVET
008349 BREHA CANOPY LIFT NYLON ROLLER + PIN
008355 WHITE ROLLER TUBULAR LIFTER WHITE
008356 RIVET FOR TUBULAR LIFTER
035379 TUBULAR CANOPY LIFT NYLON ROLL AND RIVET
CANOPY LIFTER FLAT
008341 700MM
008342 BREHA 900MM
008344 SUNLINER 900MM
008345 1200MM
Canopy li mechanisms are used to raise and lower
the roof of pop-top caravans and campers. Note:
When replacing the lier it is recommended that
the opposite lier be replaced at the same time to
prevent undue stress.
008341 - FLAT CROSS BARS
• 35kg capacity
• Max li height 560mm
008342 - FLAT CROSS BARS
• 40kg capacity
• Max li height 685mm
008344 - FLAT CROSS BARS
• 30kg capacity
• Max li height 685mm
008345 - FLAT CROSS BARS
• 35kg capacity
• Max li height 990mm
159
making anywhere home
hardware
